
Our Firewest 8609 model has all the features to tackle structural fires; a standard and lightweight design, but fully equipped with technical specifications to combat: fire resistance, waterproof system, penetration protection, electrical shock resistance, reflective properties, proper fit, among other benefits that provide firefighters with confidence and peace of mind to perform their duties.




FIREWEST 8609 STRUCTURAL
technical specifications
Resistant to traction, breaking, tearing, bending, and abrasion, ensuring greater durability and comfort of the footwear, ideal for high-demand environments.
ISO 3795 Flammability / ISO 5403 Water Absorption / ISO 5403 Water Penetration / ISO
3379 Grain Breakage.
Impact and compression resistance, non-conductive to electricity, non-transmissive to
temperature, chemical resistance in the presence of acids, no corrosion, and does not
absorb moisture.
ASTM-F2413:18 Section 5.2 Impact resistance of safety footwear.
ASTM-F2413:18 Section 5.3 Compression resistance of safety footwear.
Quick dispersion of perspiration, accelerates moisture transport, manages foot temperature (THERMAL INSULATION), soft and comfortable touch, superior abrasion resistance, antifungal, quick-drying, with waterproof membrane (WATERPROOF TECHNOLOGY) resistant to fluid penetration.
Dry-Lex footwear lining, hydrophobic/hydrophilic comfort technology with 2 zones. 85% Polyester, 15% Nylon, Warp knit Exceptional abrasion resistance: more than 153,000 cycles in Martindale.
4-layer INTERNAL STRUCTURE composed of a Dry-Lex front material laminated to 5 oz. Polyester for thermal insulation. A waterproof and breathable bi-component e-PTFE membrane is laminated to 5 oz. Polyester along with a monofilament type 6,6 nylon outer lining that wicks moisture away from the foot.
Light-reflective material, flame-retardant, that helps to visualize the user in low-light environments or during nighttime activities.
Sheet that is anatomically molded to provide heel protection.
Multilayer textile certified under CSA Z195 2014 and ASTM 2412/2413 – 18 standards for zero penetration at 1200 N.
With textile lining featuring anatomical design, density, flexibility, impact absorption, and enhanced comfort levels.
High mechanical strength, flame-retardant, ideal for environments exposed to high
temperatures and fire.
High-density, oil, and hydrocarbon-resistant flame-retardant:
● Heat resistant – High temperatures (registered trademark VIBRAM)
● Fire resistant – NFPA 5905
● NBS abrasion ASTM – Minimum 120
● Cold flexion – 7500 at -23°C ASTM D1052 250%
● Anti-slip test on ice SATRA TM 144 – 35 C.O.F
regulatory certifications:
- ASTM-F2413:18 Section 5.2 Impact resistance of safety footwear.
- ASTM-F2413:18 Section 5.3 Compression resistance of safety footwear.
- ASTM-F2413:18 Section 5.6 Dielectric strength.
- UNE EN ISO 20345: 2012 6.2.1 Puncture-resistant footwear.(*)
- UNE EN ISO 20345: 2012 5.3.2.3 Impact resistance of safety footwear.
high-value features
Did you like this boot and want it?
Stay informed about everything we have to offer in leather boots for the firefighting sector.